Roofing Contractors in Jacksonville, FL

Ask prospective roof specialists questions such as whether or not they are licensed and bonded. Ask which roofing item makers they are certified and approved by, for setup of products and warranty purposes.

Numerous resources are offered to find a licensed roofing contractor; referrals, local government licensing agencies, and web sites that provide contractors for hire, or a list of professionals who are certified and bonded.

A licensed roof contractor can be called to prevent further damage to the roof, or personal injury to the property owner caused by attempting to inspect it his or her self. A roof examination should be performed each year; constant weathering by sun, heat, rain, snow, hail, cold, and wind can trigger roofing product to break down. A licensed roofing specialist will understand what to look for.

Ask prospective roofing professionals questions such as whether or not they are licensed and bonded.

Call 888-479-8303 Now!

Our roofing contractors can provide Roof Leak Repairs. If you have any questions or concerns about our service area, please give us a call today. We are competitively priced in your region from other roofing contractors because we are confident that you will be thrilled with how your roofing project will turn out. Again, call today to schedule a consultation for your roofing needs.

Roofers in Duval County

Flat Roofs

Flat roofing systems are an excellent method to keep a structure safe from water. Knowing exactly what to do with a flat roofing system will ensure you have a working roof system that will last a long time.

They may look great, and are really typical, flat roofings do require regular maintenance and comprehensive repair work in order to efficiently prevent water infiltration. You'll be delighted with your flat roofing system for a very long time if this is done correctly.

Flat roofing systems aren't as attractive and/or popular as its newer counterparts, such as tile, slate, or copper roofings. They are just as crucial and need even more attention. In order to prevent getting rid of money on short-term repair work, you ought to know precisely how flat roofing systems are designed, the different kinds of flat roofings that are offered, and the significance of regular examination and upkeep.

A flat roof system works by providing a water resistant membrane over a structure. It includes several layers of hydrophobic products that is put over a structural deck with a vapor barrier that is usually positioned in between the roofing and the deck membrane.

Flashing, or thin strips of product such as copper, converge with the membrane and the other building elements to prevent water seepage. The water is then directed to drains, downspouts, and rain gutters by the roofing's slight pitch.

There are four most typical types of flat roofing systems. Listed in order of increasing resilience and expense, they are: roll asphalt, single-ply membrane, built-up or multiple-ply, and flat-seamed metal. They can vary anywhere from as low as $2 per square foot for roll asphalt or single-ply roofing that is applied over and existing roof, to $20 per square foot or more for brand-new metal roofings.

Utilized given that the 1890s, asphalt roll roof typically consists of one layer of asphalt-saturated natural or fiberglass base felts that are used over roof felt with nails and cold asphalt cement and typically covered with a granular mineral surface area. The joints are normally covered over with a roof compound. It can last about 10 years.

Single-ply membrane roofing is the most recent kind of roof product. It is typically utilized to replace multiple-ply roofs. 10 to 12 year warranties are common, but correct installation is important and upkeep is still required.

Multiple-ply or built-up roofing, also referred to as BUR, is made from overlapping rolls of saturated or layered felts or mats that are sprinkled with layers of bitumen and appeared with a granular roof ballast, sheet, or tile pavers that are used to secure the underlying products from the weather. BURs are developed to last 10 to 30 years, which depends upon the products used.

Ballast, or aggregate, of crushed stone or water-worn gravel is embedded in a coating of asphalt or coal tar. Given that the ballast or tile pavers cover the membrane, it makes checking and maintaining the joints of the roofing hard.

Flat-seamed roofings have been used considering that the 19 th century. Made from small pieces of sheet metal soldered flush at the joints, it can last lots of decades depending upon the quality of the material, upkeep, and exposure to the components.

Galvanized metal does require regular painting in order to prevent deterioration and split seams require to be resoldered. Other metal surfaces, such as copper, can become pitted and pinholed from acid raid and generally requires replacing. Today copper, lead-coated copper, and terne-coated stainless steel are favored as long-lasting flat roofs.

Flat roofs aren't as glamorous and/or popular as its newer equivalents, such as slate, tile, or copper roofs. In order to avoid throwing away cash on short-term repairs, you must know precisely how flat roof systems are developed, the different types of flat roofing systems that are offered, and the value of regular examination and maintenance.

There are 4 most typical types of flat roofing system systems. They can range anywhere from as low as $2 per square foot for roll asphalt or single-ply roof that is used over and existing roof, to $20 per square foot or more for brand-new metal roofings.

Today copper, lead-coated copper, and terne-coated stainless steel are preferred as lasting flat roofings.

Show Less