Roofing Contractors in Henrico, VA

Corrugated Roofing

Roofing systems can be made of anything, metal (aluminum, cooper, zinc, tin, galvanized iron), and clay or ceramic (slate, tile or shingle). The type of roofing products you want to cover and secure your house depends on your taste, viability on the house structure and budget plan.

Corrugated roof material is as widely used as the other materials readily available in the market. Some corrugated roofing materials are made of metal others are polycarbonate.

The polycarbonate corrugated roofing system is made of the exact same product that fiberglass is made of. Fiberglass and metal corrugated roofing materials are both lightweight and thin, which makes them disadvantageous since they can be torn off quickly by strong winds. Throughout heavy rains this roof material ends up being noisy as droplets of rain touch the roofing's surface.

Inspect for presence of holes or punctures from nails and seal them right away to get rid of possible leaks when installation is done. This material is easy to preserve considering that this is used for siding roofings, develop of snow, dirt and pooling is difficult.

Corrugated roofing system is cost effective and easy to obtain in the market. Reroofing is likewise manageable since this product is simple to detach from the wood frame.

Corrugated roof product is as widely used as the other materials available in the market. Some corrugated roof materials are made of metal others are polycarbonate. The polycarbonate corrugated roof is made of the same material that fiberglass is made of. Fiberglass and metal corrugated roofing products are both light-weight and thin, which makes them unfavorable because they can be torn off easily by strong winds. Setting up the material is relatively workable, given that the product is a long sheet of metal, connecting them to the wood frame or purlin will be very easy.

Call 888-479-8303 Now!

Our roofing contractors can provide Roof Leak Repairs. If you have any questions or concerns about our service area, please give us a call today. We are competitively priced in this area from other roofing contractors because we are confident that you will be thrilled with how your roofing project will turn out. Again, call today to schedule a quote for your roofing project.

Roofers in Henrico County

How to do Metal Roofing

Idea of setting up metal roof yourself? Do not even bother to think of it. Placing on new metal roof and even doing repair work is not as easy as you believed it is. Knowing how to do metal roof is a complicated one. It entails several procedures, special methods and would need the use of quite a number of assorted metal tools and devices. Metal roofing is mostly done by professional installers, as this is not just a do-it-yourself task. It is wise to employ a knowledgeable roof expert to set up a moderate to complicated metal roof. Let us have a quick learning of the procedures and the needed requirements on how to do metal roof.

The very first step on how to do metal roof is to understand how much metal roof is required and this will be figured out by measuring the height and length of the roofing system and its edges. It is important to do mindful inspection of loose roof or damaged protrusions if you are up for a change of your old roof. Inspect the roof pitch utilizing a measuring square and a level and take note of the minimum requirement as advised by the producer.

The next requirement is to determine the roof underlayment which helps avoid unnecessary moisture on the metal roofing during specific weather. The underlayment needs to extend on all roofing system edges by 1 1/2 inches, expand on vent pipes by a minimum of 1 1/2 inches, and on sidewalls by at least 6 inches. It is best to put on red rosin paper over the felt paper to prevent sticking on the metal if your metal roof is located right versus the underlayment.

The next couple of actions on how to do metal roofing will deal more with the metal sheets. Screw the metal roof into the wood slats with the usage of 1/4 inch metal wood screws every two feet on both sides. Secure the metal sheets by putting in 5/16 inch lap screws every 4 feet where 2 sheets overlap each other.

Start working on the sides of the roofing system with the metal trim to cover its edges as well as the roof ridge which need to be bent over to fully cover it. Usage 1/4 inch metal wood screws for the metal trim.

These are just the standard treatments on how to do metal roofing. If you care to ask an expert, the whole procedure is much more complicated. If you wish to try the roofing work on your garage, for instance, just make sure to carefully follow the actions and use the proper working tools.

The extremely first action on how to do metal roofing is to understand how much metal roofing is needed and this will be figured out by determining the height and length of the roof and its edges. If your metal roof is situated right versus the underlayment, it is best to put on red rosin paper over the felt paper to prevent sticking on the metal.

The next few actions on how to do metal roof will deal more with the metal sheets. Screw the metal roofing into the wood slats with the usage of 1/4 inch metal wood screws every two feet on both sides. Use 1/4 inch metal wood screws for the metal trim.

Show Less