Roofing Contractors in Boulder, CO

national or local trade organizations.

Numerous resources are offered to find a licensed roofer; recommendations, city government licensing agencies, and web sites that offer specialists for hire, or a list of contractors who are certified and bonded.

A licensed roofing specialist can be called to avoid more damage to the roofing, or individual injury to the property owner triggered by trying to check it his or her self. A roofing evaluation ought to be performed annually; continuous weathering by sun, heat, rain, snow, hail, wind, and cold can cause roofing material to break down. A certified roof contractor will understand what to look for.

Ask prospective roofing professionals questions such as whether or not they are certified and bonded.

Call 888-479-8303 Now!

Our roofing contractors can provide Roof Leak Repairs. If you have any questions or concerns about our service area, please give us a call today. We are competitively priced in your city from other roofing contractors because we are confident that you will be thrilled with how your roofing project will turn out. Again, call today to schedule a quote for your roofing job.

Roofers in Boulder County

Flat Roofs

Flat roofing systems are a terrific method to keep a building safe from water. Understanding precisely what to do with a flat roof will ensure you have a working roof system that will last a long period of time.

might look good, and are very typical, flat roofs do require routine upkeep and detailed repair in order to successfully prevent water seepage. You'll be happy with your flat roofing system for an extremely long time if this is done properly.

Flat roofings aren't as attractive and/or popular as its newer equivalents, such as slate, copper, or tile roofings. However, they are simply as crucial and require much more attention. In order to avoid discarding money on short-term repair work, you must understand precisely how flat roof systems are created, the numerous kinds of flat roofs that are available, and the significance of regular evaluation and upkeep.

A flat roof system works by offering a waterproof membrane over a building. It consists of one or more layers of hydrophobic products that is placed over a structural deck with a vapor barrier that is usually placed in between the roofing system and the deck membrane.

Flashing, or thin strips of product such as copper, intersect with the membrane and the other building components to avoid water seepage. The water is then directed to drains pipes, downspouts, and gutters by the roofing's minor pitch.

There are four most common types of flat roofing systems. Noted in order of increasing durability and expense, they are: roll asphalt, single-ply membrane, built-up or multiple-ply, and flat-seamed metal. They can vary anywhere from as low as $2 per square foot for roll asphalt or single-ply roof that is used over and existing roofing system, to $20 per square foot or more for new metal roofings.

Utilized because the 1890s, asphalt roll roofing usually consists of one layer of asphalt-saturated organic or fiberglass base felts that are applied over roofing felt with nails and cold asphalt cement and usually covered with a granular mineral surface. The seams are typically covered over with a roof compound. It can last about 10 years.

Single-ply membrane roof is the most recent type of roof material. It is frequently used to change multiple-ply roofs. 10 to 12 year warranties are normal, however appropriate setup is vital and maintenance is still required.

Multiple-ply or built-up roof, likewise referred to as BUR, is made from overlapping rolls of saturated or coated felts or mats that are sprinkled with layers of bitumen and emerged with a granular roof tile, sheet, or ballast pavers that are used to secure the underlying materials from the weather. BURs are developed to last 10 to 30 years, which depends on the products utilized.

Ballast, or aggregate, of crushed stone or water-worn gravel is embedded in a covering of asphalt or coal tar. Since the ballast or tile pavers cover the membrane, it makes examining and keeping the seams of the roofing hard.

Last but not least, flat-seamed roofing systems have been utilized because the 19 th century. Made from small pieces of sheet metal soldered flush at the joints, it can last lots of years depending on the quality of the product, upkeep, and direct exposure to the components.

Galvanized metal does require regular painting in order to avoid rust and split joints need to be resoldered. Other metal surface areas, such as copper, can become pitted and pinholed from acid raid and typically needs replacing. Today copper, lead-coated copper, and terne-coated stainless steel are favored as long-lasting flat roofs.

Flat roofs aren't as attractive and/or popular as its more recent equivalents, such as slate, tile, or copper roofs. In order to avoid tossing away money on short-term repair work, you must understand exactly how flat roofing systems are developed, the numerous types of flat roofing systems that are offered, and the significance of routine evaluation and upkeep.

There are 4 most typical types of flat roof systems. They can vary anywhere from as low as $2 per square foot for roll asphalt or single-ply roofing that is used over and existing roofing, to $20 per square foot or more for brand-new metal roofs.

Today copper, lead-coated copper, and terne-coated stainless steel are preferred as long-lasting flat roofs.

Show Less